Description
The Z-010 Tornador Cleaning Tool Classic “The Original” is totally unique; it’s air driven oscillating tip and nozzle creates a tornado cleaning action that tackles some of the most challenging jobs. Save time and product costs. Clean dirty car interiors faster and better! Great for cleaning hard vinyl, plastic, storage pockets, nooks, crannies, consoles, dashboards, and other hard to reach areas of automotive interiors.
The “original” Z-010 Tornador Classic uses a unique pressurized air process to spray a mixture of water and soap onto a dirty surface. After wiping area with a towel or brushing area simply turn a lever to air purge and help dry the cleaned surfaces. No more dipping your towel or brush into a bucket, and having to use an air gun to purge cracks and crevices or to dry the area. Soap, water and air are all combined into one tool for ease of operation! This is the slickest detailing tool we have seen in a long, long time!!
Tornador Classic is also able to work with small or mobile compressors, because the full potential power is available at pressures as low as 4.50 cfm – 90 PSI (compressor needed but not included).
Instructions for use for cleaning fabric:
1. Remove large debris and vacuum area to be cleaned.
2. Turn liquid air valve to upright position to deliver cleaning solution.
3. Hold cleaning nozzle 1 to 3 inches from area to be cleaned. Fully depress trigger, begin overlapping motion over area to be cleaned.
4. Next turn valve to down position using just air to help dry area that you just cleaned!
Instructions for cleaning dashboard and hard vinyl/plastic surfaces:
1. Recommended air pressure at 90 psi.
2. Turn liquid valve to straight up vertical position, using a overlapping motion, spray area to be cleaned.
3. Allow cleaning liquid to remain on surface for 10-to 15 seconds.
4. Follow with air only by turning valve to the horizontal position, begin drying with overlapping motion followed with a soft towel.
Z010-Instructions
